D1000X L2000 Portable pneumatic Marine fender and inflatable rubber fender are suitable for floating wharf
Small portable pneumatic Marine fender is suitable for small fishing boats, engineering ships, oil tankers, coast guard ships, floating docks, etc
Pneumatic Marine fender structure:
Pneumatic ship fender is divided into: inner rubber layer, reinforced cord layer, outer rubber layer.
Function of inner adhesive layer: shape for fender, enhance air tightness and ensure no air leakage.
Enhance connection layer: improve the strength of the transverse fender, increase the tensile strength, increase the pressure.
Outer layer: improve the wear resistance of Marine fender, better protect the inflatable rubber fender body, prolong the service life
The types of pneumatic Marine fender tyre chain net are as follows:
Tire chain network is divided into: ordinary car tires, truck tires, airplane tires; Aircraft tires have the most wear resistance (but the cost is relatively higher), the use of chains, shackles must be hot-dip galvanized; The protective pipe should be covered outside the chain, which is to protect the chain from wearing the fender body and the hull from being damaged.
Introduction to pneumatic Marine fender
Pneumatic Marine fender is the international popular ship fender products, the use of compressed air as a buffer medium, so that the ship has a softer impact wall effect, has a large impact energy absorption, acting on the ship's area pressure is low, excellent impact fatigue performance, easy installation and other advantages; Widely used in large oil tanker, liquefied gas ship, chemical ship, offshore platform, large dock, sea, etc.; Belter ship fender products are reliable
Pneumatic Marine fender two kinds of pressure performance
| SIZE | Initial pressure is 50 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 66 | 8 |
| 600 | 1000 | 76 | 10 |
| 700 | 1500 | 139 | 19 |
| 1000 | 1500 | 184 | 34 |
| 1000 | 2000 | 259 | 47 |
| 1200 | 2000 | 299 | 65 |
| 1350 | 2500 | 429 | 104 |
| 1500 | 3000 | 581 | 155 |
| 1700 | 3000 | 641 | 193 |
| 2000 | 3500 | 877 | 310 |
| 2000 | 4000 | 1010 | 531 |
| 2500 | 4000 | 1383 | 665 |
| 2500 | 5500 | 2021 | 945 |
| 3000 | 5000 | 2424 | 1359 |
| 3000 | 6000 | 2908 | 1630 |
| 3300 | 4500 | 1886 | 1177 |
| 3300 | 6000 | 2785 | 1677 |
| 3300 | 6500 | 3017 | 1816 |
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Picture of pneumatic ship fender products
